Translating lengths into time

[rocknrowl]

I have a newbie question.

Is there a rule of thumb when translating how far back a horse is in lengths to time?
For example if a horse A is 2 lengths back at the first call and then 1 length back at the second call and it takes the leaders 24 seconds what time did horse A run the distance in?

[SniperSB23]

Originally Posted by rocknrowl

I have a newbie question.

Is there a rule of thumb when translating how far back a horse is in lengths to time?
For example if a horse A is 2 lengths back at the first call and then 1 length back at the second call and it takes the leaders 24 seconds what time did horse A run the distance in?

I use 6 lengths = 1 second some use 5 lengths = 1 second. So that horse would have gone in roughly 23 4/5ths.

[Scav]

I have heard the argument that 1 length is 1 second.

I personally can care less about time, haven't looked at it in the last 14 years of handicapping and don't plan on it anytime soon. There are so many things that should be considered when looking at that time, that it is of my opinion that time is pointless (considerations could be track condition, composition, depth, wind, location on track)

[Scav]

Originally Posted by SniperSB23

I use 6 lengths = 1 second some use 5 lengths = 1 second. So that horse would have gone in roughly 23 4/5ths.

5 lengths in a SECOND?

a length is considered by the general length of a horse, no way it is 5 lengths a second, I heard it is 1 for 1

Length is not a finite number in horse racing

[jman5581]

Originally Posted by Scav

I have heard the argument that 1 length is 1 second.

If a guy is going to use time, it should be in the neighborhood of 5-6 lengths per second. It's like a last resort for me. I normally don't pay too close attention to time unless I can compare a couple contenders that run the same or very similar conditions recently.

[Scav]

Originally Posted by jman5581

If a guy is going to use time, it should be in the neighborhood of 5-6 lengths per second. It's like a last resort for me. I normally pay too close attention to time unless I can compare a couple contenders that run the same or very similar conditions recently.

I must be wrong, head might be in the clouds today.....

[jman5581]

And conveniently the times are given in fifths, I think for this very reason. But, again, some guys are known to use their own conversion. I don't care that much.

[Scav]

my SIU education is not working properly, if at all

[jman5581]

Originally Posted by Scav

my SIU education is not working properly, if at all

the memories are all that matter

[Scav]

I have been craving Quatros alot lately. $10 for a medium pizza and two Pepsi's, every Sunday during Football season we used to order about 7 of these, a pizza for each person.....I was on a first name basis with the delivery guy, he used to stop in for a pull off the footer

5-4-9-5-3-2-6 Quatros DEEP PAN PIZZA

[jman5581]

I've been making a few Winston bagels myself. They're never as good as the real thing though.

Got a La Bamba anywhere close to you?

[MaTH716]

I have always thought that 3 lengths was a second.

[ateamstupid]

EDIT: Now, thanks to Phil, I use 6-6 1/2 lengths per second. LOL. Obviously it varies depending on how fast the horses are, but that's a good rule of thumb for figuring out internal fractions, and I think if you're not using internal fractions at some point, you're not a real handicapper.

[philcski]

5 lengths/second is a horrifically terrible estimation. Don't use that number unless you absolutely insist on losing your money.

Most people consider a "length" to be 8.5 feet. Using this number, there are 621 lengths in a mile; so a mile run in 1:36 (G3 types at Aqueduct) would be an average speed of 6.47 lengths/second (37.5 mph). That same mile in 1:40 (MCL's at Aqueduct) would be 6.21 lengths/second (36 mph).

Likewise, the supposed 4.5F world record of :48.89 would be 7.15 lengths/second, so the true lengths/second (a VELOCITY calculation) differs based on the time and distance.

[philcski]

By the way... the 5 lengths/second calculation came from trotters, who run a mile in around 2 minutes which is 5.17 lengths/second.

[paisjpq]

I was always told that the 5 lengths was for standardbreds and TB's closer to 6...like Phil said

oops...nevermind, he beat me

[philcski]

Originally Posted by Scav

my SIU education is not working properly, if at all

I saw an SIU license plate at Keeneland last week... thought it might have been you for a minute, then I realized there's probably 100,000 SIU alums within 5 hours of Kee!

[SniperSB23]

Originally Posted by philcski

5 lengths/second is a horrifically terrible estimation. Don't use that number unless you absolutely insist on losing your money.

Most people consider a "length" to be 8.5 feet. Using this number, there are 621 lengths in a mile; so a mile run in 1:36 (G3 types at Aqueduct) would be an average speed of 6.47 lengths/second (37.5 mph). That same mile in 1:40 (MCL's at Aqueduct) would be 6.21 lengths/second (36 mph).

Likewise, the supposed 4.5F world record of :48.89 would be 7.15 lengths/second, so the true lengths/second (a VELOCITY calculation) differs based on the time and distance.

I actually use .16 seconds per length so I guess I am technically saying 6.25 lengths per second which looks to be a pretty good approximation.

[ateamstupid]

Originally Posted by philcski

5 lengths/second is a horrifically terrible estimation. Don't use that number unless you absolutely insist on losing your money.

Most people consider a "length" to be 8.5 feet. Using this number, there are 621 lengths in a mile; so a mile run in 1:36 (G3 types at Aqueduct) would be an average speed of 6.47 lengths/second (37.5 mph). That same mile in 1:40 (MCL's at Aqueduct) would be 6.21 lengths/second (36 mph).

Likewise, the supposed 4.5F world record of :48.89 would be 7.15 lengths/second, so the true lengths/second (a VELOCITY calculation) differs based on the time and distance.

Good info. You learn something new every day.

[philcski]

Originally Posted by SniperSB23

I actually use .16 seconds per length so I guess I am technically saying 6.25 lengths per second which looks to be a pretty good approximation.

That's perfect for a one-size-fits-all number, about a 30K claimer's speed (the "average" horse on the track.)

Originally Posted by ateamstupid

Good info. You learn something new every day.

Math nerds are good for something I guess!